Non-ferrous metal
Price
€/ton
C3
Copper (mixed material)
Used sheet, pipe, wire, wire punches.
7200
C0
Copper (new waste)
Electrotechnical wire, minimum diameter 0.5mm. Does not contain terminals, insulating cord or other insulating material.
7400
С0/1
Copper (new waste)
7300
Alumiinium
Aluminum 99%
1700
Al 4
Food aluminum Al 4
The material should not be painted and oily. Dirt 0%. Teflon-coated pans and pots do not fit into this category
Al 6
1500
Al 6
Aluminum radiators Al 6
Iron and plastic content – 0%
800
Rad
Aluminum-copper radiators Rad
Fe 0%
3000
Al 3
Aluminium (mixed material) Al 3
Iron-free mixed material (used, painted, iron up to 2%). Aluminum sheet, old sheet, pipe
1200
Al 2
Aluminum casting ironless Al 2
Fe 0.5%
1300
Al 9
Aluminium NEW Leaf Al 9
1500
Al 8
Aluminum Profile Al 8
Aluminium profile must be iron-free and plastic-free
1700
Al 8/1
Aluminum profile with plastic Al8/1
Must be iron-free
1100
Aluminum chips
Minus humidity
500
AL5
Aluminum foil and cans AL5
500
Messing
B1
Brass (mixed material)
Mixed fracture, sanitary ware, except cartridges, sleeves. The shower hose casings must be empty inside. The material must be clean without plastic, glass and rubber and steel.
4800
B2
Brass radiators
Radiators must be clean of other metal and plastic.
4250
B3
Brass chips
Brass plaster must be clean, not subject to magnetization. Dirt maximum 2%, humidity maximum 2%. Must be oil-free
4150
B5
Brass sleeves
Whole cartridges will not be accepted. Must not be magnetized.
5300
B0
Bronze
Copper 80%
5450
Roostevaba teras
RVmix
Stainless Steel
Chemical Analysis Minimum Ni 7%
850
316
Stainless steel
Chemical analysis minimum 2% Molibden
1700
Rv3
Stainless chips
Humidity maximum 2%, dirt maximum 2%. Must be oil-free.
700
Other non-ferrous metal
Cuevro Construction cable (40% copper, Fe 0%)
2000
Motorists
2500
Zn2
Zinc
Alloy or Parts. Zinc-coated material is not suitable under zinc
700
580
Lead-acid batteries
Lead plate accumulators. The battery must have a Pb designation. Batteries, battery drill batteries, Ni-Li batteries and Ni-Cd batteries are not suitable for the category of lead-acid batteries
Pb3
Em3
Electric motors Electric motors
With copper windings from, starters and generators. From the electric motors you need to remove wires, belt washers and other working bodies (impeller, pump). The engine must be complete
620
Pb1
Lead with dirt
800
Pb2
Lead clean
Alloy or parts (clean, without dirt and pitch
1200